Finescrollsaw

074 - Cruet

This is a practical cruet that will give a very special accent to any table or will decorate any sideboard cabinet. The patterns are based in an old English design that I have entirely reconstructed in the computer.

This picture is courtesy of Boris Radovskiy from the USA. He is a member of the Carolina Scrollers club. The cruet is made with Walnut and dark and light cherry, and finished with semi gloss polyurethane.

This project is designed to be made preferably with 3/16, 1/8 and 1/16 inches wood or with 4.5, 3 and 1.5 mm wood. The mounting is quite simple, so these thickness can be changed by easily modifying some of the slots. The following table gives the dimensions of the cruet depending on the suggested wood thickness:

	Height	Width
3/16, 1/8 and 1/16 inches wood	7.3 in.	8.1 in.
4.5, 3 and 1.5 mm wood	17.1 cm	19.4 cm

Please note that this pattern is registered and copyrighted. If you would like to have it I offer it for 8 € plus shipping. The pattern is computer made, which provides total precision, and nicely printed for convenient scrolling. Please write me to [email protected] to buy this pattern or for any questions.


This picture has been sent by Tom Cocks from the USA. He is a member of the Carolina Scrollers scroll saw club.	This picture has been sent by Jose Luis Tellez from Celaya (Guanajuato, Mexico).


This picture has been sent by Ester and Isaac Arditi from Israel.	This picture has kindly been sent by Daniel Navarre from France.


This picture has been sent by Wolfgang Roth from Germany.	This picture has been sent by Johannes Obernosterer from Germany.


This picture has kindly been sent by Antonino Gambino from Italy.	This picture has been kindly sent by Oleg Velesjuk from Kaliningrad, Russia.